We thank you very much for stopping by.

Contact Information is _here_



Beechhurst Inc. Specialty Automotive Division
is proud to present the Advanced Interior Lighting Control. This will keep your overhead light on after you close the door and then fade out.
This module is manufactured right here in New York City, using the best components we could find, not the cheapest.
We kept this as simple as possible to make it easy for you to get this in with the least amount of time!

Operation:
Please refer to the wiring diagram. This module is designed to work with an interior lamp that is always "hot" and the door switch provides ground.
If you have something else, please call!
When the module is first connected, the light may turn on. This is normal.
When you open the door, the NC switch provides ground and the interior lamps come on. The underlying function of the module is to latch for about 25 seconds when you first open the door.
When you close the door, the module keeps the light on.
The light level holds for about 15 seconds, then starts to fade for about 4 seconds, and goes out. The latest version has a fourth (green) lead for optional connection to the ignition - turning the ignition on will switch the module off, if you connect the green lead.


Module
The module is quite small, less than 2 inches square and .8 inches high, w/ flying leads.

Pricing: The module is $74.97, postpaid.

If you are in NYS, as you know, we MUST collect the sales tax. Please add correct amount.



Limitations:
The module has been redesigned to provide more consistant operation. Although the power transistor is rated to 43 Watts (Volts times Amps), you should really limit the load to not more than 3 Amps. This is based on an alternator system which runs at ~ 13.8 Volts. (13.8 Volts x 3 Amps = 41.4 Watts)

Wiring Diagram for module

All units have been tested and run to insure your complete satisfaction.


Your comments and suggestions are well appreciated. We would like to hear from you.


Payment:
You can send an E-Mail and then send a check. We need a valid postal system address as we will be using the USPS Priority Mail. Don't forget the sales tax if you are in NYS!


Other Online Stores


Return Policy:
You can return any of our products for any reason. We only insist that the product is not damaged.
We will issue a refund.
We want customers to be happy with their purchase, and encourage questions to be resolved before a purchase is made. If you have any doubts about the suitability of one of our products for your application, please call. (800) 431-1384.

Disclaimers:
Successful installation of this control module depends on your ability to properly install the module as shown and connect the three wires.
If the wires are not connected as shown above, you will: fry the module, and, possibly start a fire! We cannot be held responsible for the installation or any damage done during the installation. Your satisfaction with this product is guaranteed by us. If you are not pleased, you can return it (undamaged) for a refund of the purchase price.
Thanks. We know you will find this product very useful.

SAD Home Page
Back to SAD Home Page